NordicTrack T 7.2 NETL79811.1 User Manual Download

Page: 36 / 36

Part No. 344743 R0513A

This electronic product must not be disposed of in municipal waste. To

preserve the environment, this product must be recycled after its useful life

as required by law.

Please use recycling facilities that are authorized to collect this type of waste in

your area. In doing so, you will help to conserve natural resources and improve

European standards of environmental protection. If you require more information

about safe and correct disposal methods, please contact your local city office or

the establishment where you purchased this product.

RECYCLING INFORMATION

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to

provide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING

near the end of this manual)

ORDERING REPLACEMENT PARTS

Summary of Contents for T 7.2 NETL79811.1





































Search results

Summary of Contents for T 7.2 NETL79811.1

Reviews:

Related manuals for T 7.2 NETL79811.1

Brands by name

Popular brands

NordicTrack T 7.2 NETL79811.1, User Manual

Search results

Summary of Contents for T 7.2 NETL79811.1

Reviews:

Related manuals for T 7.2 NETL79811.1

Brands by name

Popular brands