11
23
85
8
8. If there are four screws (G) preattached inside
the Right and Left Handrails (84, 85), remove
and discard the screws.
IMPORTANT: To avoid damaging the Pulse
Crossbar (23), do not use power tools and do
not overtighten the #10 x 1 1/4" Screws (9).
Orient the Pulse Crossbar (23) as shown. Attach
the Pulse Crossbar to the Handrails (84, 85) with
four #10 x 1 1/4" Screws (9) and four #10 Star
Washers (5); start all four Screws, and then
tighten them.
9. With the help of a second person, hold the con-
sole assembly (H) near the Right Handrail (84)
and the Left Handrail (not shown).
Connect the ground wire (I) from the console
assembly (H) to the Console Ground Wire (58)
on the Pulse Crossbar (23).
Next, connect the Upright Wire (81) to the con-
sole wire (J). Then, remove the wire tie (A) from
the Upright Wire.
9
H
A
J
81
84
I
23
9
9
5
5
84
G
G
58
