11
11. Slide two Foam Pads (22) onto the Lock
Frame (11).
Then, press two Pad Caps (45) into the Foam
Pads (22).
Next, pull the indicated Long Adjustment
Knob (13) outward, insert the Lock Frame
(11) into the Leg Frame (10), and then
release the Long Adjustment Knob.
Make sure that the Long Adjustment Knob
(13) is engaged in the indicated adjust-
ment hole in the Lock Frame (11).
Insert an M6 x 37mm Bolt (33) into the Leg
Frame (10)
and into the loop on the end of
the Spring (17).
Tighten an M6 Nut (43) onto
the Bolt.
12. Insert the Pad Tube (18) into the welded tube
on the Leg Frame (10).
Next, tighten an M4 x 15mm Screw (58) into
each side of the Pad Tube (18).
Slide two Foam Pads (22) onto the Pad Tube
(18).
Then, press two Pad Caps (45) into the Foam
Pads (22).
11
10
43
33
11
17
Hole
22
22
45
45
13
12
10
22
22
18
58
45
45
13. Pull the indicated Short Adjustment Knob (37)
outward as far as possible, and insert the end
of the Leg Frame (10) a few inches into the
Backrest Frame (8).
See the inset drawing.
Press the indicated
tab on the Leg Frame Bushing (38), and
press the Leg Frame Bushing upward into the
Backrest Frame (8).
Make sure that the tab
is in the indicated hole in the Backrest
Frame.
Then, slide the Leg Frame (10) farther into
the Backrest Frame (8), and engage the Short
Adjustment Knob (37) into one of the holes in
the Leg Frame.
8
10
37
Holes
10
38
8
Hole
Tab
13
