background image

29

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right. Move slowly as you stretch ——never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from 
your hips. Allow your back and shoulders to relax as you reach 
down toward your toes as far as possible. Hold for 15 counts, then 
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and 
back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot toward 
you and rest it against the inner thigh of your extended leg. Reach 
toward your toes as far as possible. Hold for 15 counts, then relax. 
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and 
groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your 
hands against a wall. Keep your back leg straight and your back foot 

 at on the 

 oor. Bend your front leg, lean forward and move your 

hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times 
for each leg. To cause further stretching of the achilles tendons, 
bend your back leg as well. Stretches: Calves, achilles tendons and 
ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp one 
foot with your other hand. Bring your heel as close to your buttocks 
as possible. Hold for 15 counts, then relax. Repeat 3 times for each 
leg. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward. 
Pull your feet toward your groin area as far as possible. Hold for 15 
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip 
muscles.

1

2

3

4

5

Summary of Contents for NTL79011.0





































Reviews: