background image

25

Press the Power button again and save chan-
nels into the television’s memory.

When the Power button is pressed, the television
will begin scanning all the cable channels avail-
able in your area. When no cable signal is de-
tected on a channel, the channel will be skipped.
When a cable signal is detected, the channel will
be saved into memory and the next channel will
be selected. This process will continue until the
highest channel is reached. 

Do not remove the

key while the television is scanning channels.

Note: If you are viewing channels through an ex-
ternal source such as a cable box or a VCR, the
television will save only the channel used by the
external source.

When you are finished using the information
mode, remove the key.

To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper-
ation as it monitors your heart rate during your work-
outs. 

To purchase the optional chest pulse sensor,

call the telephone number on the front cover of this
manual.

6

5

Summary of Contents for NTL22907.1









































Reviews: