NordicTrack NORDICTRACK GX 4.5 User Manual Download Page 16

16

HOW TO USE THE EXERCISE BIKE

 HOW TO PLUG IN THE POWER ADAPTER

IMPORTANT: If the exercise bike has been exposed 
to cold temperatures, allow it to warm to room 
temperature before plugging in the power adapter. 
If you do not do this, you may damage the console 
displays or other electronic components.

Plug the power adapter 
into the receptacle 
on the frame of the 
exercise bike. Then, 
plug the power adapter 
into an appropriate 
outlet that is properly 
installed in accordance 
with all local codes and 
ordinances.

 HOW TO ADJUST THE SEAT

The seat can be adjusted forward or backward to the 
position that is the most comfortable. To adjust the 
seat, push downward on the seat handle, slide the seat 
to the desired position, and then pull upward on the 
seat handle to lock the seat in place. 

HOW TO ADJUST THE PEDAL STRAPS

To adjust the 
pedal straps, 
first pull the ends 
of the straps off 
the tabs on the 
pedals. Adjust 
the straps to the 
desired position, 
and then press the 
ends of the straps 
onto the tabs. 

HOW TO LEVEL THE EXERCISE BIKE

If the exercise 
bike rocks slightly 
on your floor dur-
ing use, turn one 
or both of the lev-
eling feet on the 
rear stabilizer until 
the rocking motion 
is eliminated.

Handle

Pedal 

Strap

Tab

Leveling 

Feet

Summary of Contents for NORDICTRACK GX 4.5

































Reviews: