10
8. Raise the Frame (67) to the position shown.
Have a second person hold the Frame until
step 9 is completed.
Orient the Storage Latch (87) so that the large
barrel and the latch knob are in the positions
shown.
Remove the tie from the lower end of the
Storage Latch (87). Keep the holes in the latch
cap aligned with the holes in the Storage Latch.
Make sure to keep the latch cap inside the
Storage Latch.
Attach the Storage Latch to the
bracket on the Base (103) with a 3/8" x 2" Bolt
(4) and a 3/8" Jam Nut (7).
7
Large
Barrel
Latch
Knob
103
Latch
Cap
4
67
87
8
7. Slide the Right Upright Sleeve (90) upward
against the console assembly. Attach the Right
Upright Sleeve with two #8 x 3/4" Tek Screws
(24).
Attach the Left Upright Sleeve (not shown) to
the console assembly in the same way.
24
90
7
Console
Assembly
24
