8
3. With the help of a second person, carefully tip
the incline trainer down so that the Base (80) is
flat on the floor.
Attach a Wheel (12) to each side of the Base
(80) with a 3/8" x 2 1/2" Bolt (6) and a 3/8" Nut
(7) (only one side is shown).
3
6
7
12
80
4
89
87
104
4. Set the Console Cover (87) face down on a soft
surface. Remove the two #8 x 1 1/2" Screws
(104) from the Console Back (89).
Save the
Screws for step 6.
Separate the Console Back
from the Console Cover, and remove the
Console Crossbar (not shown) from inside.
5. Position the Console Crossbar (103) between
the Uprights (77, 79) as shown. Attach the
Console Crossbar to the Uprights with four 5/16"
x 2 3/4" Bolts (4) and four 5/16" Star Washers
(9).
Do not fully tighten the Bolts yet.
Remove wire the tie from the Upright Wire (78).
5
103
4
9
77
79
78
Wire Tie
4
9
