background image

4

Weight

Storage

Tube

Dumbbell

Storage

Rack

Pull-up Bar

Upright

Weight Guide

Weight Glider

Barbell

Safety Spotter

Right Side

Left Side

Note: The terms Òright sideÓ and Òleft sideÓ are
determined relative to a person sitting on the
optional weight bench; they do not refer to
right and left on the drawings in this manual.

Thank you for selecting the versatile NordicTrack

¨

GRT380 weight rack. Whether your goal is a shapely
figure, dramatic muscle size and strength, or a healthi-
er cardiovascular system, the NordicTrack

¨

GRT380

will help you achieve the specific results you want. In
addition, the weight rack can be used with the optional
NordicTrack

¨

GRT340 weight bench, shown in the

drawing below. To order the NordicTrack

¨

GRT340, call

1-888-825-2588.

For your benefit, read this manual carefully before
using the NordicTrack GRT380 weight rack. 

If you

have additional questions, please call our Customer
Service Department toll-free at 1-888-825-2588
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
NTBE05900. The serial number can be found on a
decal attached to the weight rack (see the front cover
of this manual).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Before You Begin

Optional NordicTrack

¨

GRT340

Model No. NTBE01701

Summary of Contents for Grt380
















Reviews: