background image

13

68

D

E

15

59

A

B

40

HOW TO USE THE TABLET HOLDER

IMPORTANT: The Tablet Holder (68) is designed 
for use with most full-size tablets. Do not place 
any other electronic device or object in the 
Tablet Holder. 

The magnetic Tablet Holder (68) can be attached at 
any height on the Mirror (59).

Orient the Tablet Holder (68) so that the slot (A) is 
facing upward and the padded side (B) is facing the 
Mirror (59). 

IMPORTANT: Always hold the Tablet 

Holder in the horizontal position when attaching 
it to the Mirror. Do not attach the Tablet Holder to 
any other part of the strength system except the 
Mirror.

Attach the Tablet Holder (68) to the Mirror (59) at the 
desired height. 

Make sure that the Tablet Holder is 

level and centered on the Mirror.

Set the Tablet (40) in the Tablet Holder (68). Reverse 
these actions to remove the Tablet and the Tablet 
Holder.

HOW TO USE THE CHARGING PORT

The strength system features a charging port that 
you can use to charge the Tablet (40) while you 
exercise. 

To use the charging port, plug a USB charging cable 
(not included) into the charging port (C) on the left 
side of the strength system and into the receptacle 
on the Tablet (40); 

make sure that the USB charg-

ing cable is fully plugged in.

 

HOW TO USE THE TABLET STAND

IMPORTANT: The Tablet Stand (15) is designed 
for use with most full-size tablets. Do not place 
any other electronic device or object in the 
Tablet Stand.

To insert a tablet into the Tablet Stand (15), lift the 
slide (D) upward, and then set the tablet in the tray 
(E). Then, pull the slide downward over the top 
edge of the tablet. 

Make sure that the tablet is 

firmly secured in the Tablet Stand. 

Reverse these 

actions to remove the tablet from the Tablet Stand.

C

Summary of Contents for FUSION CST STUDIO





























Reviews: