19
HOW TO USE AN ONBOARD WORKOUT
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER on
page 16.
2. Select the main menu.
See step 2 on page 18.
3. Select an onboard workout.
To select an onboard workout, touch the runner
button at the bottom of the screen. The workouts
menu will appear on the screen.
Select the desired workout category from the work-
outs menu and then select the desired workout.
Note: It may be necessary to scroll the screen to
view all the menu options.
The screen will show the name and duration of the
workout. The screen will also show the approxi-
mate number of calories you will burn during the
workout and a profile of the resistance and incline
settings of the workout.
4. Start the workout.
Touch the Start Workout button to start the workout.
Each workout is divided into segments. One
resistance level, one incline level, and one tar-
get cadence (speed) are programmed for each
segment.
During the workout, the profiles will show your
progress. To view the profiles, flick or slide the
screen.
During some workouts, the screen will show a map
of the route and a marker indicating your prog-
ress. Touch the buttons on the screen to select the
desired map options.
As you exercise, keep your pedaling speed near
the target cadence for the current segment. The
target zone meter will prompt you to increase,
decrease, or maintain your pedaling speed. To
view the target zone meter, flick or slide the screen.
Note: The target cadence is displayed in revolu-
tions per minute (rpm).
IMPORTANT: The target cadence is intended
only to provide motivation. Your actual pedaling
speed may be slower than the target cadence.
Make sure to pedal at a speed that is comfort-
able for you.
If the resistance level and/or incline level for the
current segment is too high or too low, you can
manually override the setting by pressing the
Resistance buttons or the Incline buttons.
If you
press a Resistance button,
you can then manu-
ally control the resistance level (see step 3 on page
18).
If you press an Incline button,
you can
then manually control the incline level (see step
3 on page 18).
To return to the programmed
resistance and/or incline settings of the work-
out,
touch the Follow Workout button.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors,
such as your weight. In addition, if you manu-
ally change the resistance level or incline level
during the workout, the number of calories you
burn will be affected.
To pause the workout, touch either the back button
or the home button at the bottom of the screen. To
continue the workout, touch the Resume button. To
end the workout, touch the End Workout button.
The workout will continue in this way until the last
segment ends. A workout summary will appear on
the screen. After you view the workout summary,
touch the Finish button to return to the main menu.
You may also be able to either save or publish your
results using one of the options on the screen.
5. Follow your progress.
See step 4 on page 18.
6. Measure your heart rate if desired.
See step 5 on page 18.
7. Turn on the fan if desired.
See step 6 on page 18.
8. When you are finished exercising, unplug the
power cord.
See step 7 on page 18.
Summary of Contents for Freestride Trainer FS9i
Page 4: ...4...
