background image

15

Fuji

ELNT79916

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

The advanced console offers an array of features 

designed to make your workouts more effective and 

enjoyable. 

When you use the manual mode of the console, you 

can change the resistance of the pedals with the touch 

of a button. 

While you exercise, the console will display continuous 

exercise feedback. You can also measure your heart 

rate using a compatible heart rate monitor. See page 

19 for information about purchasing an optional 

chest heart rate monitor.

You can also connect your smart device to the console 

and use an iFit

®

 app to record and track your workout 

information.

The console also offers a selection of onboard 

workouts. Each workout automatically changes the 

resistance of the pedals as it guides you through an 

effective workout. 

You can even connect your personal audio player to 

the console sound system and listen to your favorite 

music or audio books while you exercise.

To use the manual mode, see page 16. To use 

an onboard workout, see page 17. To connect 

your smart device to the console, see page 18. 

To connect your heart rate monitor to the console, 

see page 19. To use the sound system, see page 

19. To change console settings, see page 20.

Note: If there is a sheet of plastic on the display, 

remove the plastic.

Note: The console can display speed and distance in 

either miles or kilometers. To change the unit of mea-

surement, press the Standard/Metric button repeatedly. 

For simplicity, all instructions in this section refer to 

miles.

Summary of Contents for Freestride Trainer FS3i





























Reviews: