10
8. Start four #10 x 3/4" Screws (9) with four #10
Star Washers (32) into the Pulse Bar (112) and
the Handrails (87).
Slide the Pulse Bar (112) as far in the direc-
tion shown as possible, and then tighten the
#10 x 3/4" Screws (9). Do not overtighten the
Screws.
Remove the wire tie from the Upright Wire (81).
Insert the pulse wire (E) from the Pulse Bar (112)
through the looped Cable Tie (99) on the right
handrail assembly (C).
See step 7. Tighten all four 5/16" x 2 1/2"
Screws (37).
9
32
Wire
Tie
81
9
32
8
112
E
99
87
87
C
7. Attach the left handrail assembly (B) to the Left
Upright (89) with two 5/16" x 2 1/2" Screws (37)
and two 5/16" Star Washers (11). Be careful
not to pinch the Upright Wire (81). Start both
Screws, but do not tighten them yet.
Attach the right handrail assembly (C) in the
same way. Note: There is no wire on the right
side.
Remove and discard the four indicated
screws (D).
7
89
C
37
37
11
11
B
D
D
81
