12
11. Attach the console assembly (D) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8)
. Start all four Screws,
and then tighten them. Be careful not to
pinch the wires and cables.
Insert the wires and cables upward into the con-
sole assembly (D).
11
2
8
74
Wires
Cables
74
D
10. With the help of a second person, hold the con-
sole assembly (D) near the Handrails (74).
See the inset drawing.
Connect the Upright
Wire (83) to the console wire (F).
The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Next, connect the two fan wires (B, G). Then,
remove any wire ties from the Upright Wire (83)
and the fan wires.
Connect the two coaxial cables on the other
side (not shown).
Insert the excess cable and
fan wire into the Upright (84).
83
D
F
10
83
F
B
G
74
84
8
2