background image

16

Resistance Dial

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

The advanced console offers an array of features 

designed to make your workouts more effective and 

enjoyable. 

When you select the manual mode of the console, you 

can change the resistance of the pedals with a turn 

of the dial. As you exercise, the console will provide 

continuous exercise feedback. You can even measure 

your heart rate using the handgrip heart rate monitor or 

the optional heart rate monitor.

The console offers twelve preset workouts—six weight 

loss workouts and six performance workouts. Each 

workout automatically changes the resistance of the 

pedals and prompts you to vary your pedaling speed 

as it guides you through an effective workout.

In addition, the console offers two heart rate workouts 

that change the resistance of the pedals and prompt 

you to vary your pedaling speed to keep your heart 

rate near a target heart rate.

The console also offers three watts workouts that 

change the resistance of the pedals and prompt you 

to vary your pedaling speed to keep your power output 

near a target level.

The console features the iFit interactive workout sys-

tem, which enables the console to accept iFit cards 

containing workouts designed to help you achieve 

specific fitness goals. 

For example, lose unwanted pounds with the 8-week 

Weight Loss workout. iFit workouts control the resis-

tance of the pedals while the voice of a personal trainer 

coaches you through your workouts. iFit cards are 

available separately. To purchase iFit cards, go to 

www.iFit.com or see the front cover of this manual. 

iFit cards are also available at select stores.

You can even connect your MP3 player or CD player 

to the console sound system and listen to your favorite 

music or audio books while you exercise.

To turn on the power, see page 17. To use the  

manual mode, see page 17. To use a preset  

workout, see page 19. To use a heart rate work-

out, see page 20. To use a watts workout, see 

page 21. To use an iFit workout, see page 23. 

To use the sound system, see page 23. 

Note: If there is a sheet of plastic on the display, 

remove the plastic.

Summary of Contents for E 4.1 NTEVEL75012.0

































Reviews: