NordicTrack Commercial VR25 Elite User Manual Download Page 17

Page: 17 / 40

HOW TO PLUG IN THE POWER ADAPTER

IMPORTANT: If the exercise bike has been exposed

to cold temperatures, allow it to warm to room

temperature before you plug in the power adapter.

If you do not do this, you may damage the console

displays or other electronic components.

Plug the power adapter

into the receptacle

on the frame of the

exercise bike. Then,

plug the power adapter

into an appropriate

outlet that is properly

installed in accordance

with all local codes and

ordinances.

HOW TO ADJUST THE SEAT

To adjust the seat, push downward on the seat handle,

slide the seat forward or backward to the desired posi-

tion, and then pull upward on the seat handle to lock

the seat in place.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal

straps, fi rst pull the

ends of the straps off

the tabs on the pedals.

Adjust the straps to the

desired position, and

then press the ends

of the straps onto the

tabs.

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike

rocks slightly on your

fl oor during use, turn

one or both of the

leveling feet beneath

the rear stabilizer until

the rocking motion is

eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder was designed for

use with most full-size tablets. Do not place any

other electronic device or object into the tablet

holder.

To insert a tablet into

the tablet holder, set

the bottom edge of the

tablet in the tray.

Make

sure that the tablet is

firmly secured in the

tablet holder.

Reverse

these actions to

remove the tablet from

the tablet holder.

Power Adapter

Handle

Strap

Tab

Leveling

Feet

HOW TO USE THE EXERCISE BIKE

Summary of Contents for Commercial VR25 Elite









































Search results

Summary of Contents for Commercial VR25 Elite

Reviews:

Related manuals for Commercial VR25 Elite

Brands by name

Popular brands

NordicTrack Commercial VR25 Elite, User Manual

Search results

Summary of Contents for Commercial VR25 Elite

Reviews:

Related manuals for Commercial VR25 Elite

Brands by name

Popular brands