8
2. Hold the Right Upright (88) near the Right Base
Cover (117).
See the inset drawing.
Make sure
that the wire tie in the Right Upright is extending
from the hole as shown. Tie the wire tie securely
around the end of the Upright Wire (86). Then, pull
the other end of the wire tie until the Upright Wire
is routed completely through the Right Upright.
Wire
Gently pull up on the Upright Wire (86) as you
set the Right Upright (88) on the Base (115) in-
side the Right Base Cover (117).
Be careful not
to pinch the Upright Wire.
Attach the Right Upright (88) to the Base (115)
with two 3/8" x 3 3/4" Patch Bolts (2) and two
3/8" Star Washers (8);
do not tighten the
Patch Bolts yet.
Note: It may be necessary to
tip the top of the Right Upright forward slightly
and rotate the bottom as you thread the Patch
Bolts into the Right Upright.
117
Wire Tie
2
88
86
2
8
86
88
3. Hold Left Upright (85) near the Left Base Cover
(118).
See the inset drawing.
Make sure that
the wire tie in the Left Upright is extending from
the hole as shown. Tie the wire tie securely
around the end of the 50" TV Cable (81) and the
50" A/V Wire (80).
Pull the other end of the wire tie until the 50" TV
Cable (81) and the 50" A/V Wire (80) are routed
completely through the Left Upright (85). Then,
set the Left Upright on the Base (115) inside the
Left Base Cover (118).
Attach the Left Upright (85) to the Base (115)
with two 3/8" x 3 3/4" Patch Bolts (2) and two
3/8" Star Washers (8);
do not tighten the
Patch Bolts yet.
Note: It may be necessary to
tip the top of the Left Upright forward slightly
and rotate the bottom as you thread the Patch
Bolts into the Left Upright.
With the help of a second person, lower the
treadmill off the cardboard stands. The stands
will be used in assembly step 9.
118
115
3
8
2
85
81
80
115
Cardboard
Stands
80
81
85
Wire Tie
Wire Tie
Wire Tie