6
1. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 95mm Screws (76).
2. Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 95mm Screws (76).
1
2
3
2
76
76
1
1
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one adjustable wrench
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have your own
set of wrenches. To avoid damaging parts, do not
use power tools.
