7
ASSEMBLY
• To watch an assembly
video, go to
http://productvideo.co/
assembly/sears/
nordictrack or use your
mobile phone or smart-
phone to read the QR
code at the right.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• The underside of the walking belt is coated with
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• Assembly requires the following tools:
the included hex key
one adjustable wrench
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
1.
Make sure that the power cord is unplugged.
With the help of a second person, raise the
Upright (79) to the vertical position.
Attach the Right Base Leg (86) to the right side
of the Upright (79) with two 5/16" x 3/4" Screws
(1).
Attach the Left Base Leg (not shown) to the
left side of the Upright (79) in the same way.
1
86
79
2. Identify the Left and Right Base Covers (88, 92).
Slide the Left Base Cover (88) onto the left
Upright (79). Slide the Right Base Cover (92)
onto the right Upright.
Then, press the Left and Right Base Covers (88,
92) downward until they snap into place.
88
2
92
79
1