background image

10

7.   Raise the Frame (55) to the position shown. 

Have a second person hold the Frame until 

step 8 is completed. 

    Orient the Storage Latch (58) so that the large 

barrel and the latch knob are in the positions 

shown. 

   Attach the lower end of the Storage Latch (58) 

to the Upright (79) with a 3/8" x 2" Bolt (6) and a 

3/8" Nut (7). 

7

58

Large

Barrel

55

Latch 

Knob

79

7

6

8.    Attach the upper end of the Storage Latch (58) 

to the Frame (55) with a 3/8" x 1 3/4" Bolt (8) 

and a 3/8" Nut (7). Note: It may be necessary 

to move the Frame back and forth to align the 

Storage Latch with the Frame.

  Lower the Frame (55) (see HOW TO LOWER 

THE TREADMILL FOR USE on page 25).

8

8

7

58

9.    Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic 

on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. 

Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used 

to adjust the walking belt (see page 29).  

55

10.  IMPORTANT: See page 12 and plug in the 

power cord. Next, see page 14 and turn on 

the power.

   Press the 1 Step Incline/Decline button num-

bered -3. Then, adjust the incline to the level 

desired. IMPORTANT: To avoid damaging the 

treadmill, adjust the incline to zero percent 

before you fold the treadmill.

10

IMPORTANT: 

Make sure to follow 

all instructions in 

this step

Summary of Contents for 831.24924.0





































Reviews: