10
5
Avoid pinching
the wires
4
5
62
80
Wire
Tie
62
2
5. Identify the Right Handrail (5). Orient the Right
Handrail as shown.
While a second person holds the Right Handrail
(5) near the Upright (2), tie the indicated wire tie
to the Right Pulse Wire (80). Then, pull the other
end of the wire tie upward out of the top of the
Upright.
See the inset drawing.
Have a second person
hold the Right Rail Cover (7) out of the way.
Insert the lower end of the Right Handrail (5) into
the opening between the Right Outer Shield (17)
and the Right Inner Shield (19).
Tip: Avoid pinching the Right Pulse Wire
(80).
Attach the Right Handrail (5) to the Upright
(2) with four M8 x 13mm Screws (62).
Do not
tighten the Screws yet.
Attach the Left Handrail (4) in the same way.
6
6. Attach the Right Handrail (5) to the Frame (1)
with three M10 x 20mm Screws (61).
Do not
tighten the Screws yet.
Attach the Left Handrail (4) in the same way.
Next, attach the Upright (2) with four M10 x
20mm Screws (61).
Do not tighten the Screws
yet.
4
61
61
1
5
7
19
17
2
61
61
5
Summary of Contents for 831.23896.0
Page 4: ...4 ...