background image

24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If you do not do this, you may damage the
treadmill when you fold it. Remove the key and unplug the
power cord. CAUTION: You must be able to safely lift 45
lbs. (20 kg) to raise, lower, or move the treadmill. 

1. 

Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos-
sibility of injury, do not lift the frame by the plastic
foot rails. Make sure to bend your legs and keep your
back straight as you raise the frame.

Raise the frame

about halfway to the vertical position. 

2. Raise the frame until the latch knob locks into the storage

position.

Make sure that the latch knob is locked in

the storage position.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° F (30° C). 

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the stor-
age position as described above. 

Make sure that the latch

knob is locked in the storage position.  

1. Hold a handrail and the frame and place one foot against

one of the wheels. 

2. Tilt the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location. 

Never

move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.

3. Place one foot against a wheel, and carefully lower the

treadmill until it is resting in the storage position.

Base

Handrail

Frame

Wheel

Latch Knob

Frame

Summary of Contents for 30812.0





































Reviews: