11
7. Using a plastic bag to keep your fingers clean,
apply some of the included grease to the Long
Axle (35) and to two 16mm Wave Washers (54)
(only one is shown).
Insert the Long Axle (35) through the Upright (4)
and center it.
Slide a 16mm Wave Washer (54) and the Right
Upper Body Arm (61) onto the right side of the
Long Axle (35).
Repeat these actions for the Left Upper Body
Arm (47).
Tighten an M8 x 16mm Screw (82) and an M8
x 22mm Washer (97) into each end of the Long
Axle (35)
at the same time.
7
47
61
82
82
97
35
4
54
Grease
8. While a second person lifts the back of the Right
Pedal Plate (14), insert the Right Pedal Bracket
(133) into the right Pedal Arm (44).
Attach the Right Pedal Bracket (133) with an
M10 x 20mm Screw (91) and an M10 x 25mm
Washer (134).
Do not overtighten the Screw;
the Right Pedal Bracket must turn freely.
Repeat this step on the other side of the
elliptical.
8
91
44
134
133
14
Summary of Contents for 29835.1
Page 4: ...4...
