Nordica ETNA 2500, Manual

Page: 8 / 28

6
Never clean the panes with abrasive products. The scratches could be transformed into cracks and
the panes could break. Never try to clean the hot panes when the fireplace is working. You will find
cleaning products at your retailer.
Never use flammable products, which could cause an explosion.
Inspect the panes regularly in order to detect cracks. If you see a crack, extinguish the fire
immediately return the door to your retailer to replace the pane before re-using your fireplace.
Never use your fireplace if a pane is broken.
Never replace the pane by another material. If needed, you must replace it by another pane of the
same size that you can get from your retailer.
2.3.11 Maintenance of plated surfaces
Never clean plated surfaces with abrasive cleanser. Plated surfaces of your heating appliance can
easily be scratched. To retain their original finish only use a soft damp during maintenance.
ATTENTION
Heat the unit with the door ajar can damage the plating and void the warranty.
2.3.12 Glass replacement
You can get the panes at your retailer or at Nordic Steel Products Int.
Steps to follow for an Everest door (see EVEREST image):
1)
Take out items 5, 4 and 3 off the door.
2) Clean the frame of all glass fragments, if required.
3) Use only ceramic glass with the following dimensions: EVEREST: 14-5/8
"
x 12-1/4
"
.
4) Place the window in the center of the frame of the door.
Note: Handle with care to prevent any cut.
5) Replace items 3, 4 and 5 following the order shown.
Note: Tight the screws carefully to avoid braking the glass.
If the
door’s gasket is broken, please change it.
EVEREST