Nordica 7114530, User Manual

Page: 35 / 136

ENgLIsH
DO NOT PUT THE DEVICEs IN DIRECT OR INDIRECT CONTACT WITH WATER. THEY MAY NOT WORk PROPERLY IN THE
PREsENCE OF HUMIDITY OR IF EXPOsED TO WATER.
RADIO THERMOsTAT
The radio thermostat is the device dedicated to reading the ambient temperature. It transmits the temperature every 2 minutes so as to
optimise battery life.
If communication between the radio thermostat and the system is interrupted for more than 4 minutes, the
!
icon will be activated and
the display will show “XX °C” as an indication of the ambient temperature. Restored communication between the devices is intercepted by the
system within the same times
RADIO THERMOsTAT CONFIgURATION
aUTO mode requires the ambient temperature read by the radio thermostat to autonomously adjust the fan speed. This procedure allows the
supplied radio thermostat to be synchronised to detect the ambient temperature.
CONTROl PROCEDURE
• Press key 4.
• Press key 1 or 2 until RADIO THERMOSTAT REGISTRATION and confirm with key 4.
• When TURN ON RADIO THERMOSTAT appears, insert the batteries in the device.
• If the device enters into communication with the control unit within 10 seconds,
REGISTRATION OK
appears.
• If the device does not communicate with the control unit within 10 seconds,
REGISTRATION NOT OK
appears. In this case, repeat the
procedure
• Press key 4 to confirm and key 3 to go back to the previous menus to the initial state.
TYPE AND REPLACEMENT OF BATTERIEs
Insert/replace the batteries by simply removing the battery cover on the back of the device. Insert the batteries according to the printed
symbols and on the battery itself.
2 aaa batteries are needed.
REsPECT THE ENVIRONMENT!
UsED baTTERIEs CONTaIN METals THaT aRE HaRMFUl TO THE ENVIRONMENT, aND THEREFORE MUsT bE DIsPOsED
OF sEPaRaTElY IN sPECIal CONTaINERs.
ADVICE AND PRECAUTIONs FOR THE UsE OF THE RADIO THERMOsTAT
• Remove the batteries if it is not used for a long time.
• Handle the RaDIO THERMOsTaT with care.
35