Fig. 5
DOWNROD MOUNT
FLUSH MOUNT
Marette
Marette
Fig. 4b
Fig. 4a
Step 4 - MOUNTING FAN ASSEMBLY
NOTE:
Once ground wires are connected, carefully tuck
wires and marette into the metal outlet box making sure that
the wires are clear of the hemisphere and downrod when
positioned in mounting bracket (Downrod Mount Only).
NOTE:
Once wires are connected, carefully tuck wires and
marettes into the metal outlet box making sure that the wires
are clear of the hemisphere and downrod when positioned in
mounting bracket (Downrod Mount Only).
CONNECTING BLACK, WHITE, AND (RED OR BLUE) WIRES
- Connect white wire from outlet
box to white wire from fan using
marette (not supplied).
- Connect black wire from outlet
box to black wire from fan plus
(red or blue wire) using a marette.
NOTE:
A red or blue wire would
be power for a light kit if
applicable.
- Place two screws and lock washers (B) on mounting plate (marked b
on Fig. 6a) corresponding to slots in canopy (C). Screw in two turns.
- Position canopy (C) against mounting plate aligning slots to screws
(marked b on Fig. 6a) then turn to lock.
- Position and tighten the two screws and washers (marked a on
Fig. 6a) then tighten the two screws (marked b on Fig. 6a).
Black Wire
White
Wire
Red or
Blue Wire
Model no.
052-2231
7
Model no.
052-2231-4
A
ssembly
Ground Wire
(Green Wire)
Ground Wire
(Green Wire)
