Step 6 - MOUNT BLADE BRACKETS TO BLADES
NOTE:
When installing fan on sloped ceiling, make sure
tab on hanger bracket faces towards the top of the slope.
Depending on the slope, a longer downrod may be required
to prevent fan blades from hitting the ceiling.
WARNING:
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
Step 5 - ENGAGE HEMISPHERE (Downrod Mount Only)
- Carefully rotate fan assembly until groove in hemisphere locks over
tab of canopy assembly. (Fig. 6b)
Fig. 6a
Fig. 6b
- Take out hardware containing
blade bracket screws and
flat washer
(S).
- Place blade bracket screw (S)
through flat washer (S), fibre
washer (T), hex nut (T) and blade (N).
- Align with corresponding hole
in blade bracket (M).
- Repeat with (2) remaining
screws and tighten. (Fig. 7)
Fig. 7
T
T
S
N
M
Downrod
Hemisphere
Groove
(a)
(b)
(b)
B
(a)
Model no.
052-2231
8
Model no. 052-1191-4
A
ssembly
