5
NORDIC
Adjusting the Brightness
• Press the On/Off switch briefly to switch on the cordless worklight at maximum brightness. To adjust the brightness
in 2 stages, hold down the On/Off switch until the required brightness is obtained.
MAINTENANCE AND SERVICE
MAINTENANCE AND CLEANING
The light source cannot be replaced. If the light source is defective, the entire cordless worklight has
to be replaced.
When the battery is no longer operative, please refer to an authorised after-sales service agent for
the light.
The cordless worklight is maintenance-free and contains no components that must be replaced or
maintained.
To avoid damage, clean the plastic lens of the cordless worklight only with a dry, soft cloth. Do not use
cleaning agents or solvent.
TRANSPORT
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The
user can transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or forwarding agency), special requirements on
packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert
for hazardous material is required.
Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around in the packaging. Please also observe possibly more
detailed national regulations.
DISPOSAL
Cordless worklights, battery packs, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of cordless worklights and batteries/rechargeable batteries into household waste!
BATTERY PACKS/BATTERIES:
Summary of Contents for POBA3200
Page 1: ...OPERATING MANUAL 18V CORDLESS LED WORKING LIGHT ...
Page 6: ...6 NORDIC ...
Page 7: ...7 NORDIC ...
Page 8: ...8 NORDIC ...