
7 Firmware update of Smart Remote 3
Doc. ID 4414_003 v1.2
Page 58
Figure 45: nRFgo Studio Program SoftDevice tab
1.
Select the HEX file to program. Click
Browse
to find the file.
2.
Select if you want to enable or disable readback protection of Region 0.
3.
Set SoftDevice size.
This sets the size of the code memory region 0 and will not be available if the size is defined by the HEX file.
4.
Click
Program
.
Important:
The SoftDevice is included in the installer file of the Smart Remote 3 for nRF5x.
7.8 Programming application
This function lets you program an application onto the chip.
Before you start, perform the steps in
Selecting a board to program
on page 56.
Before nRFgo Studio starts programming, it verifies that the HEX file matches the actual memory
configuration. If it matches, nRFgo Studio continues with the programming, if not, it stops the programming
and returns an error message. For example, if an application requires the SoftDevice on the chip, it will check
the memory configuration for the SoftDevice before programming the chip.
Important:
This programming will not set up any memory Regions.
Program an application onto the chip in the
Program Application
tab.