6
NORDIC
Do not expose charger and battery pack to water
Use battery and charger only in closed rooms
Do not incinerate battery pack or charger
6. PRODUCT ACCESSORIES
1.
Lever for loading magazine
2.
Magazine
3.
Tacker head
4.
Adjusting knob
5.
Switch
6.
Battery (not included)
7.
Charger (not included)
8.
Battery latch button
7. OPERATION
7.1 CHARGING THE LI-ION BATTERY PACK
Battery packs for this tool are shipped in a low charge condition to prevent possible problems.
Insert the power supply into the charger. Plug the charger power supply into a power outlet. Attach a
battery to the charger. The indicator on the charger will be red indicating the battery is charging.
When batteries become fully charged the indicator on the charger will turn green.
NOTE: A battery that is new or has not been used for a longer period does not develop its full capacity
unitl after approx 5 charge/discharge cycles.
Do not recharge the batteries after use if they are not to be use for an extended period of time. Recharge
the batteries as and when they are needed.
Do not charge batteries immediately after extended use. Allow the batteries to cool down otherwise it will
be not charged fully.
7.2 INSERTING & REMOVING THE BATTERY PACK
Insert the battery pack into the base of the grip until it clicks
in place. To remove the battery pack, press the battery release
button and simultaneously pull the battery out of the machine.
