Nordic NG-L0218 Operating Manual Download Page 12

12

NORDIC

•  Clean the device regularly with a damp cloth and a small amount of soap. Do not use detergents or solvents that can 

damage the plastic parts of the device. Be careful that water does not get inside the device.

9.2 MAINTENANCE

Our machines have been designed to operate over a long period of time with a minimum of maintenance. 
Continuous satisfactory operation depends upon proper machine care and regular cleaning. Please charge 
the battery regularly, for example, once every 6 months.

10. REPAIR

Only use accessories and spare parts recommended by the manufacturer.
If the device is damaged after a few days, despite our quality control and your maintenance, only an 
authorized electrician can repair it.

11. ENVIRONMENT

 Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check you’re your Local Authority or 
retailer for recycling advice.

Summary of Contents for NG-L0218













Reviews: