Nordic 300 Cycle, Assembly Instruction Manual, Page: 8 / 14

3. Slide to fix the Computer (6) onto the computer holder of Front Post (4). Note to let the
Middle Compute Wire(20) comes out from the rear gap, then plug to the Upper Computer
Wire (19). Use 4 Screw(30) to tight it.
4. Fix the Handlebar (5) to the Front Post (4) and tighten with 1set of M8x20 (16), Clamp(17),
Then T Knob(18). Insert the Clamp cover Left(27) and Clamp Cover Right(28) in to the
Handlebar(5), then using 2 screws(29) to fastened. Be sure of the Pulse wire(23) go through
the hole on Clamp Cover Left(27).