12
FCC COMPLIANCE
STATEMENT
This hand-held device complies with part 15
of the FCC Rules. Operation is subject to
the following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the hand-held equipment.
FCC COMPLIANCE NOTICE
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
IC COMPLIANCE STATEMENT
This hand-held device complies with
Canadian radio regulation.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the hand-held equipment.
To prevent radio interference to the licensed
service, this device is intended to be
operated indoors and away from windows
to provide maximum shielding. Equipment
that is used outdoors is subject to licensing.
RF EXPOSURE STATEMENT
This equipment complies with EU, FCC and
IC’s RF radiation exposure limits set forth
for an uncontrolled environment under the
following conditions:
1. This equipment should be installed and
operated such that a minimum separation
distance of 20cm is maintained between the
antenna and user’s/nearby person’s body at
all times.
2. This equipment must not be co-located
or operating in conjunction with any other
antenna or transmitter.
THE PICTURE SHOWS THE SAFE WAY
TO HANDLE THE DEVICE.
ETL LISTED
CONFORMS TO UL STD 60950-1
CERTIFIED TO CAN/CSA STD C22.2 NO.
60950-1
В PОССЙИ
ГОСТ Р
СЕРТИФИКАТ
СООТВЕТСТВИЯ
В
СИСТЕМЕ ГОСТ Р
Устройство обработки информации:
компьютер портативный Nordic ID Morphic
удостоверен сертификатом соответствия
ГОСТ Р № POCC FI.AГ23.B04078, срок
действия с 27.12.2011 до 26.12.2012,
выдан органом по сертификации
продукции «ТЕСТМАКС» (ООО «Бизнес
аспект»), РОСС RU.0001.11AГ23.
4004039
ETL LISTED
Summary of Contents for 811-4A
Page 1: ...QUICK GUIDE ...
