6
1. Take the brackets A, B and C and assemble them together with four screws (D), see Fig.2
2. Insert the assembled brackets into the holes (E) in the back
of the heater, and then slide the assembled brackets up to
match the inclined plane of the back cover.
match the inclined plane of the back cover.
3. Fix the assembled brackets to the heater with 2 screws (D)
Fig.4
D
4. Drill 2 holes with a distance of 638mm between them (G)
with a diameter of 8 mm; insert 2 expansion bolts (H) and 2
long screws (I) into the hole.
5 mm length of the screws should be left outside of the wall, so
you can hang up the heater.
Warning! When drilling holes: Always ensure that there is no
wiring, pipework, in the area to be drilled.
Warning! When drilling holes, Always check to ensure there is no wiring, pipework, etc in the area to be drilled.
Fig.5
638
5. Hang the product on the 2 long screws and slide it to a
stable position.
Usage
Before turning on the machine:
1. Check if the power wire is under good condition.
2. The product requires 220-240V AC power supply. Before
use, please confirm if the rated current of the power socket
meets the local requirements with safe grounding.
LED display overview
Product digital display overview.
"HI" means that high setting is currently selected.
"LO" means that low setting is currently selected.
"clock icon" means that timer is set to on.
The numbers indicate current temperature and when you set
the temperature or timer, the digits will flash.
Turning on/off the heater
Plug the heater into the mains supply; Press the main switch to
the "ON" position, then use the on/off button to turn the heater
on and off.
To turn the heater of completely:
1. Switch both the buttons to Off
EN
User Manual
