6
2.
3.
1.
Product information
1. Air outlet
2. Wall hanging bracket
3. Effect and power buttons
Included in package:
The heaters feet: 2 pcs
Short screws: 2 pcs
Long screws: 2 pcs
Wall plugs: 2 pcs
Rubber pad : 2 pcs
Heater
Manual
Wall bracket
Choose location
1. The heater is an appliance which can be free standing or be
mounted on a wall.
2. Do not locate the appliance near any furniture, curtains,
doors, windows or other appliances or in corners. Keep the
heater at least 1 meter away from the surrounding walls and
furniture in order to avoid fire hazard.
Installation
Warning! Before you install your heater, please make sure
the heater is turned off and is disconnected from mains.
For free-standing:
The 4 short screws are pre-assembled on the heater.
Unscrew the 4 short screws first.
1. Turn the heater upside down.
2. Fix the two feet to the heater with the four short screws.
3. Turn the heater to its normal position and put it in an even
and stable place.
4. The heater is ready to use as free-standing now.
For wall mounted:
1. Remove the feet from the heater.
2. Fix the two rubber pads to the heater on the back shell.
3. Prepare with 2 screws on the wall, with 118 mm distance
from each other, hang the heater onto the two screws on the
wall.
The two rubber pads should be propped up on the wall, to help
with the stability of heater.
4. The installation is completed.
Usage
Before turning on the machine:
1. Check if the power wire is under good condition.
2. The product requires 220-240V AC power supply. Before
use, please confirm if the rated current of the power socket
meets the local requirements with safe grounding.
Put the machine on a flat surface
Uneven surfaces causes the tip-over protection to malfunction.
Please put the heater on a flat surface.
EN
User Manual
