11
Feed the Axle through the holes in the Pivot Bracket which will allow the top edge of the plow to be
2” BACK FROM THE BOTTOM EDGE as shown in the “plow blade side view” above.
IMPORTANT: THE AXLE MUST BE 7“ UP FROM THE GROUND FOR PROPER PLOW OPERA-
TION. Secure the Axle with a cotter pin at the opposite end as shown.
IMPORTANT: Line up with holes on each side and insert the Axle so it is 7” ABOVE THE
GROUND. Lock the axle in place with a cotter pin from the opposite side.
For the (2) holes closest to the Mower: Use
the 1/2” x 1’ long bolts, nylon insert lock nuts,
with washers positioned as shown, and secure
from underneath as shown. Do not tighten fully,
but allow parts to pivot freely.
AXLE
AAAA
2”
PLOW BLADE SIDE VIEW
AAAA
7”
PIVOT BRACKET
PIVOT PLATES
ATTACHED TO
PLOW
12
PAGE - 5
