Nordco TRIPP HD, Operation Manual

Page: 59 / 82

MAR 2016 49457610 TRIPP HD RevB 7-1
Section 7
ROUTINE MAINTENANCE
OVERVIEW
Within this section the routine maintenance required on
this machine will be outlined.
Please read and comply with all of the safety
precautions in this manual BEFORE operating this
machine. See
Section 1, “SAFETY INSTRUCTIONS
AND INFORMATION” .
GENERAL
Recommended service intervals are for normal
operating conditions. Service more often if the engine
is operated under adverse conditions, such as areas
with extreme heat, extreme cold, excessive dust,
excessive humidity, and near salt water.
NOTICE
Neglecting routine maintenance can result in failures or
permanent damage to equipment.
SAFETY DURING MAINTENANCE
Alert others in the area that service or maintenance is
being performed on this machine. Become familiar
with, and follow your company’s
Lockout/Tagout
procedures when performing maintenance on this
machine. See “LOGOUT/TAGOUT” on page 2-1.
DO NOT start the engine if repairs or work is being
performed alone. You should always have at least two
people working together if the engine must be run
during service. One person needs to remain in the
command position (at the controls), ready to stop the
machine and shut off engine if required.
REQUESTING ASSISTANCE
If you have any questions regarding maintenance and
service on this machine, please call:
Nordco Service Department
1-800-445-9258
The assistance process will be much faster if the
machine Name, Model and Serial Number are at hand
when calling.
LUBRICATION AND MAINTENANCE
Service points on this machine (adjustments,
inspections, lubrication, etc.) are indicated on the
following illustration. The items listed on the chart are
preceded by a “D1, W1, M1, Q1, and Y1" designation.
These points are shown on the illustration and refer to
the service interval for each point of the machine:
• D = Daily
• W = Weekly
• M = Monthly
• Q = Quarterly
• Y = Yearly.
Maintenance instructions are given for each point and
are separated by the Service Length Interval.