Nordcap 406600891, Service Manual

Page: 22 / 76

22
LIBERO LINE HOB INDUCTION
2.1.4.3 DROP IN
All appliances, except fry tops
, are available with a specific PNC code as “drop in “ D.I., model.
Example picture of a D.I HOB.
1-Apply a sponge gasket type to the top surface. We recommend to not use silicone , this because it could
complicate any future extraction.
2-The fixing assembly can be inserted into the three different precut slots (1,2,3) depending on the thickness
of the top.
3- Fixing assembly installed
4- Tighten the screw to blocking the appliance into place
5- End result
NOTE !
The sponge gasket, fixing assembly and air conveyor are not supplied with the drop-in appliance,
they are accessories and must be ordered separately.