Nordcap 1PH - WOK - DI, Service Manual

Page: 58 / 75

58
LIBERO LINE WOK INDUCTION
HOB TO HOOD (H2H, SPECIAL FUNCTION)
This function is accessible directly on the U.I of the libero line appliances and does NOT need to be accessed
(like service menu or customer menu). How does this function work: The Libero Line appliances are equipped
with an I.F (infra-red) communication sensor located under the U.I glass; this sensor will communicate and
send data to the I.R port located on the left side of the libero point appliance.
The
“hob to hood” H2H icon
and button are used in association with two internal functions: Automatic
and Manual “hood” Fan Speed regulation.
Be aware, in below description, that rules for the button and for the icon color are different, depending to the
function currently active.
MANUAL FAN SPEED
With this function, by pressing the H2H icon, the customer interrupts the automatic fan speed regulation and
can decide manually what speed to set on the “hood” of the libero point.
With the Manual Fan Speed the user has the possibility to select desired hood fan speed from speed zero
(meaning fan OFF) to speed 4 (max) by repeatedly pressing the H2H button on the U.I of the appliance.
This function is always available when the UI is
ON , no matter if cooking zones are IDLE , STANDBY or
COOKING sub-state.
When U.I. enters an ON state the manual Fan Speed is not active. Fan speed is initially set to zero and will
eventually change depending on Automatic Fan Speed algorithm.
Pressing the H2H button the Manual Fan Speed mode is automatically activated. Once manually selected, fan
speed is maintained up to when the U.I. turns in
OFF or COOLING_DOWN states.
Manual Fan Speed regulation is not available when the U.I. is OFF or COOLING_DOWN . H2H button will be
inactive.
Manual Fan Speed regulation is not available during cleaning special function. H2H button is inactive and the
icon is off. Despite of this, automatic fan speed regulation continues during cleaning.
If the appliance is turned off the Manual Fan Speed setting is lost.
Manual fan operation overrides the Automatic Fan Speed regulation.
NOTE !
This special function is only available when the libero appliances are installed on board to a LIBERO
POINT appliance.