27 of 44
NAC-S20-15 Active Compensation Unit - User Manual – Ver. 1.0
5.2.
Connection Scheme, PLC/IPC
The following schematic illustrates how to connect the NAC in an application using PLC/IPC.
Figure 24
ID
Unit
Description
1
NAC-S20-15
Nordbo Active Compensation unit.
2
Air compressor
Supplies air to the NAC in order for it to function.
3
NAC-CTRL
Controls the active compensation unit.
4
Higher order controller (PLC/IPC) for
controlling I/O on NAC control unit
Controls the force applied using IO’s according to
settings configured in the web interface.
5
Power supply unit 24V.
Supplies the system with power.
Table 10
1
2
3
4
5
