1.5 USS - Data transfer
BU 0050 GB-3111
Subject to technical amendments
33
Setpoint position (16 or 32 Bit)
With the special extension
Posicon (SK XU1-POS)
of the SK 700E
the absolute setpoint position can be
transferred as a 16 or 32 Bit value in Setpoint 1, whereby the resolution is 1=0.001 rotation. In addition, the
control terminals (
setting of POSICON control bits
) can be transferred in binary.
The
SK 53xE / SK54xE version
of the SK 500E series is also able to transfer positions, however here, the
32 Bit position is divided into two 16 Bit components (Low word and High word). The assignment of the two
16 Bit components is then carried out via appropriate parameterisation on 2 arbitrary setpoints (e.g.: SW1
and SW2).
16-Bit setpoint position setting:
As a
16 Bit
value, a range of +32767 (= 32,767 revolutions) to -32768 (= -32,768 revolutions) is possible.
The 16 Bit setpoint position is transferred as the second word in the process data area (as with the setpoint
frequency)
32-Bit setpoint position setting:
As a
32 Bit
value, the full position range of +/- 50000,000 revolutions is available. With the SK 700E/750E,
the 32 Bit setpoint position is transferred in the area of the process data as the
second and third
word (with
the SK 500E in any two of the three words PZD2, PZD3, PZD4).
PZD1
PZD2
PZD3
PZD4
STW
SW1, 32 Bit
SW2
SK 700E/750E
POSICON
P546=3, 32bit setpoint position
SW1, 16 Bit
SW2, 16 Bit
SW3
SK 53xE
P546=21 (23)
Low word
P547=22 (24)
High word
P546[-01]=21
(23)
Low word
P546[-02]=22
(24)
High word
SK 54xE
Control Bit settings
POSICON (SK 700E/750E/53xE)
:
A 16 Bit value is transferred in which the control terminals of the POSICON special extension unit are
mapped. The setpoint position is based on the position array or position increment as per (P610).
The transferred Bits have the following meaning (see Manual BU 710 / BU 0510):
SK 700E + SK TU1-POS
Bit
Function
Bits 0-5
Position array/position increment
Bit 6
Reference point run
Bit 7
Reference point
Bit 8
Teach-in
Bit 9
Quit teach-in
Bit 10
Reset position
SK 500E
Bit
Function
Bits 0-3
Position array/position increment
Bits 4-7
Vacant
Bits 8-15 no significance
