Memory Setup
The memory function allows you store the minimum
and maximum lengths and weights for up to 10
species. Once programmed with state, local, or tour-
nament regulations, the scale will give you “Thumbs
Up” (
) or “Thumbs Down“ (
) based on your pro-
gramming.
Selecting a Memory Spot
1. Press and hold “ ” for 3 seconds. "1" will be displayed on
the LCD, representing the first memory setting.
2. Press “ ” to reduce the setting or “ ” to increase the set-
ting.
3. Press “E” to select the setting.
Setting the Minimum Weight
1. “WGT” and “
” will flash.
2. Press “ ” to reduce the setting or “ ” to increase the set-
ting.
3. Press “E” to select the setting.
Setting the Maximum Weight
1. “WGT” and “
” will flash.
2. Press “ ” to reduce the setting or “ ” to increase the set-
ting.
3. Press “E” to select the setting.
Setting the Minimum Length
1. “LGT” and “
” will flash.
2. Press “ ” to reduce the setting or “ ” to increase the set-
ting.
3. Press “E” to select the setting.
Wax Pencil Storage
1. Using a fingernail, pry the rubber plug from the scale
housing.
2. Remove the wax pencil from the scale housing by
turning the scale on it’s side and gently tapping.
3. Reinsert the pencil and firmly press the rubber plug
back into the scale housing when complete.
E
WGT
WGT
LGT
LGT
- 3 -
IMPORTANT:
The rubber tab is designed to prevent the plug from being
separated from the housing. It should remain attached. Do
not excessively pull on the plug or you will damage the tab.
Summary of Contents for Sonic-Laser Scale XP
Page 1: ......
