Safety Information:
•
Read the following safety information carefully
before attempting to operate this scale.
•
Only qualified personnel should perform repairs or
servicing not covered in this manual.
•
Periodically wipe the case with a dry cloth. Do not
use abrasives or solvents on this scale.
•
Do not store in a high temperature environment
(automobile, vehicle or boat dashboard, direct sun-
light, etc).
•
Want to save yourself hours of aggravation? If so,
then read this manual entirely before attempting
the installation and/or use.
Installing the Battery
1. Using a thin “Flat Head” screwdriver, turn the screws on the battery door
counterclockwise until loose.
2. Remove the battery cover from the scale.
3. Attach a “9-Volt” battery
(not included)
to the
battery plug making sure that battery terminals
are properly aligned with the plug terminals.
4. Properly align the battery cover and reinstall it
by turning the screws clockwise until “snug”
(Do
Not Over Tighten)
.
Warning:
Although the scale can be temporarily submerged in water with-
out damage, it does not float. Avoid allowing it to enter water
without having a firm grip on it.
- 1 -
The Sonic-Laser Scale has an accuracy of plus or
minus 3%. Therefore, it should only be used as a
guide to estimate a fish’s length. If the fish is close to
the legal size regulation in your fishing area, it is rec-
ommended that you use a tape measure or flat meas-
uring board to ensure that the catch is of legal size.
IMPORTANT:
To ensure the battery cover remains water tight,
coat the battery cover seal with petroleum jelly
(Vaseline
®”
) each time you replace the battery.
Summary of Contents for Sonic-Laser Scale XP
Page 1: ......
