Norcold 3163G, Important Product Information Manual, Page: 6 / 15

8. Turn the manual shut-off valve located on top of the refrigerator to "OFF". See Figure 4.
9. Remove both the positive and negative leads from the vehicle’s battery.
10. Disconnect the vehicle’s 12 volt DC supply wires from the refrigerator’s terminal block
(Figure 1).
11. Disconnect the LP gas supply line from the refrigerator’s manual shut-off valve.
See Figure 4.
CAUTION: To prevent gas leaks or damage to the gas supply lines and fittings, use
two wrenches when connecting or disconnecting gas fittings.
12. Remove the three (3) screws securing the vent cover to the vehicle’s exterior surface.
See Figure 3.
13. Remove the two (2) screws securing the inner disk to the vent terminal housing. See
Figure 3.
14. Carefully push the vent terminal housing inward until free from the vehicle’s wall.
15. Carefully pull the refrigerator forward to gain access to the refrigerator’s AC power cord.
Disconnect the refrigerator’s AC power cord from the wall receptacle.
16. Remove the refrigerator from it’s enclosure.
Valve Shown in
Off Position
LP Gas
Supply Line
U-Tube to
Thermostat
OFF
Figure 4 - Manual Shut-Off Valve
4