Norco SHB-940, User Manual, Page: 66 / 74

SHB-940
Intel
®
Q45 based PICMG1.3 Full Size CPU Card
53
Appendix
Appendix 1: Driver Installation
Please install the driver as per the following steps:
Insert Driver disk into CD-ROM, so installation of the driver can be made either
automatically or manually. Now manual installation instructions are given as below:
1) A variety of options available regarding manual installation, which you can check from
Device Manager.
2) Right click
“
my computer ", select "management", and go to
“
Device Manager"
3) Right click "display controller
”
in the menu of graphic card, select
“
Properties ", click
“
Driver",
select
“
update driver".
4) Select
“
Show the list of all drivers which are designated locations so that choices can be
made from it ", select "next."
5) Select the location of display driver, click
“
ok"
6) Implement the installation, restart the system.
Proceed with the installation of other drivers after restarting the system, untill all
installations are implemented. Then you can see the devices you installed in Device
Management working normally.