
SHB-940
Intel
®
Q45 based PICMG1.3 Full Size CPU Card
8
2
:
Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan
assembly in place.
3
:
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. Do not
forget to connect the CPU fan connector! Hardware monitoring errors will occur if you fail to
plug this connector.
NOTE
: If you purchased a separate CPU heatsink and fan assembly, make sure that you have
properly applied Thermal Interface Material to the CPU heatsink or CPU before you install the
heatsink and fan assembly.
2.3.3 Dismount the CPU heatsink and fan
To dismo the CPU heatsink and fan:
1
:
Disconnect the CPU fan cable from the connector on the CPU card.
2
:
Rotate each fastener counterclockwise.
Summary of Contents for SHB-940
