Norco BIS-6592LC, User Manual, Page: 12 / 83

BIS-6592LC
LED Screen Control Hardware Platform supporting 1080PHD Display
5
2. Install CPU
3. Install Motherboard
4. Intall other expansion cards
5. Connect all signal cable, power cable, panel control cable and power supply
6. Start the computer and complete the BIOS setting
Key components of this motherboard are integrated circuit, and these components
will be easily damaged by electrostatic influence. So, before installing the
motherboard, you should always keep the following precautions in mind:
1. Hold the board by edges, don
’
t touch any components or plug and socket pins
2
．
Wear anti-static gloves/wrist strap while touching the integrated circuit components, such as
CPU, RAM, etc.
3
．
Put those unused or uninstalled components in static shielding bags or trays
4
．
Please first check the power switch is off before connecting the power plug
2.3 Install CPU
Please follow the steps below to install CPU:
1. Use screwdriver to unscrew the CPU, making CPU
“
Locked
”
to
“
Unlock
”
, illustrated as
below:
2. Hold the CPU by both sides, then align the CPU Pin1 (a golden triangle mark) with the notch
on CPU socket and insert the CPU into the socket. Check the connection and then lock the
CPU by using the screwdriver.
Note: Please make sure the CPU you used matches the motherboard. After system boots up,
BIOS will auto detect the CPU type and its frequency. BIOS settings will not allow users to
adjust the CPU frequency doubling. To ensure the system works stably, we don
’
t recommend
you to make the CPU overlocking. Right now, most Intel CPU frequency doubling is factory
default as unchangeable.