Ultium Motion Quick Start Guide
2
(Rev A)
On behalf of Noraxon…
Welcome and congratulations on acquiring your new Ultium Motion System!
This guide will provide you with step-by-step instructions on how to install your new hardware and software, adjust device
settings, and record your first data set.
Let us begin by walking through how to install your new hardware.
Note: This is not meant to be a complete user manual, but a guide to help you get started with your system. For more
detailed operating instructions for the Ultium Motion System, please refer to the Ultium Motion User Manual (P-8708).
1
System Unboxing
The Ultium Motion System is packed within a reinforced padded box for storage and protection during transport. Upon
arrival, carefully remove all contents and verify the following components are present.
Figure 1
–
Ultium Receiver (#880)
Figure 2
–
Ultium Sensor Charger (#873)
Figure 3
–
Motion Sensor
(#870 or #876)
Figure 4
–
Sensor Charger to Receiver Cable
(#CBL34)
Figure 5
–
A to B USB Cable (#CBL2)
Figure 6
–
Sensor Charger Power
Source (#PSU1)
Additional items that may be included with your Ultium Motion System are:
•
Ultium Motion Strap Set (#874X, #874Y, or #874Z)
•
Double-Sided Sensor & Torso Adapter Tape (#874D & #874E)
•
Sensor Body Segment Label Set (#610A)
•
Ultium Motion User Manual (#P-870)
2
Installing the
Hardware
Step 1