Insole Smart Lead Quick Start Guide
6
(Rev A)
4 Configuring the Hardware
Step 1
Open MR3, typically listed under
Noraxon ->
MR3
Click on the
Hardware Setup
button in the
upper right-hand corner.
Step 2
Select the Ultium icon, within the
‘New Device’
column, and click on the
Insert
button.
Note: Make sure the Receiver is connected to
the USB port of the computer via USB Cable
(CBL2).
Step 3
The Ultium Settings dialog will appear as shown.
Within the ‘
Settings
Tab’
, select the desired
collection Sampling Rate.
If using MyoSync, check the Use Noraxon
MyoSync checkbox (see the Ultium EMG User
Manual for more information).
Select a RF Network from the RF Network list. In
most cases the default “1” will work. However, if
using multiple Ultium systems they must be
placed on separate networks.
Note: Firmware updates for the Receiver will be
indicated here, if they are required.