Insole Smart Lead Quick Start Guide
2
(Rev A)
Welcome from Noraxon
Congratulations on acquiring your new Ultium Insole System!
This guide will provide you with step by step instructions on how to install your new
hardware and software, adjust device settings, and record your first data set.
Let’s begin by walking through how to install your new hardware.
Note: This is not meant to be a complete manual, but a guide to help you get started with your system. For
more detailed instructions on operating the Ultium system and its features please refer to the complete
Ultium EMG User Manual
, also included with your system.
1 System Unboxing
The Ultium Insole system is packed within a reinforced padded box for storage and protection during
transport. Upon arrival, carefully remove all contents and verify the following components are present.
Contents will vary depending on the purchased package.
Figure 1 - Ultium Receiver (part
#880)
Figure 2 - EMG Sensor Docking Station (part #883
Figure 3 - EMG Sensor (part
#810)
Figure 4 - Ultium Insole Smart Lead
(part # 826)
Figure 5 - A to B USB Cable (part #CBL2)
Figure 6 - EMG Sensor
Charger Power Source (part
#PSU1)
Your system may differ depending on the number of sensors included with your
shipment, quantities of EMG sensors, EMG SmartLeads Sensor Docking
Stations, and Docking Station Cables.
Additional items that may be included with your Ultium System include:
•
Double side tape samples (part #842C)
•
Sample electrodes (typically dual electrodes (part #272)
•
Ultium User Manual (part #P-8808)
Figure 8
– Sensor Docking Station
to Ultium Receiver cable (part#
CBL34)